Concrete Driveway Cost in Ballwin, MO
Our price for a plain broom finish concrete driveway in Ballwin is $5 to $10 per square foot, installed. Color or exposed stone moves it to $8 to $14 and stamped concrete to $10 to $21, and the number for your own property comes in a free written quote after the site visit.
For the arithmetic behind these figures, see our Ballwin cost guide for a new or replacement drive and the nationwide cost guide. The right slab depends on the soil, the drainage, local permit rules and how the surface will be used. Requirements vary by site, scope and jurisdiction; the city or county permit office, and a site visit before the quote is final, determine what applies.
What each finish involves is on the Ballwin, MO services page, and the towns we serve are on the Ballwin, MO page.
Our Concrete Prices for the Ballwin Area
Concrete Driveways
$5 to $10 per sq ft
Set on compacted stone with a broom surface. Color or exposed stone costs $8 to $14 per square foot, and taking out the old slab $1 to $4.
Concrete Patios
$5 to $10 per sq ft
A broom-finish slab priced like a drive and pitched away from the house wall. Adding color or exposed stone lifts it into the $8 to $14 tier.
Stamped & Decorative Concrete
$10 to $21 per sq ft
Pressed pattern plus color, on a drive or a patio. Pattern detail and how many colors you pick place the job inside that range.
Concrete Walkways & Sidewalks
$5 to $10 per sq ft
Front walks and side paths with a broom surface. A path that runs out to the street can add the right-of-way permit step to your quote.
Each property gets its own figure on a free written quote, which becomes final after the site has been seen. Final scope and pricing are confirmed after the site has been inspected and the project requirements have been documented.
Commercial Flatwork
Lot Sections & Small Lots
$5 to $10 per sq ft
Settled or broken sections replaced, and small new lots poured, after digging past any soft fill to firm ground and compacting a stone base.
Pads & Aprons
$5 to $10 per sq ft
Loading aprons and pads for a dumpster or equipment, dug to firm ground. A pad 12 by 24 feet totals $1,440 to $2,880 for its 288 square feet.
Sidewalks & Ramps
$5 to $10 per sq ft
Charged by the square foot. In Ballwin, a walk within about 12 feet of the curb is usually street right-of-way, which takes the Excavation Permit. Ramps are quoted per job.
Curb & Gutter
Quoted per job
Each run is quoted once seen. A Ballwin job disturbing 10,000 square feet or more of private ground also needs the City's grading permit, listed on the quote.
What Moves a Ballwin Concrete Quote
The Finish You Choose
Plain broom lines set the low end. Color, exposed stone and stamping each step the price up, and a house can pair a stamped patio in back with a plain broom drive in front.
Removing the Old Drive
Taking out and hauling away the original slab costs $1 to $4 per square foot and appears on its own line. For 576 square feet, that is $576 to $2,304.
Base Work on Filled Ground
Where a lot was built up with fill, we dig deeper and compact more stone before forming. The visit shows how much, and the added work is itemized.
Pitch and Drainage
A drive has to shed rain toward the street and away from the garage. If the existing fall is wrong, correcting it adds grading to the quote.
The Street-Side Permit
Digging in the city right-of-way takes an excavation permit. The quote lists that step as its own item whenever the work reaches the street.
Ballwin Concrete Cost FAQ
What would a two-car driveway cost in Ballwin?
Is the old driveway removed at a separate price?
How do I price a long driveway or a different size?
Will the city permit change the cost?
Get Your Free Concrete Quote
Request a free quote for your driveway, patio or walkway.
Get a Free QuoteOr call us directly: (919) 219-2946