Concrete Driveway Cost in 2026
Stoutwell Concrete · September 27, 2026 · 7 min read
A new concrete driveway typically costs $5 to $10 per square foot installed for a plain broom finish. Colored or exposed aggregate concrete runs $8 to $14 per square foot, and a stamped pattern runs $10 to $21 per square foot. Removing an old driveway before the new pour typically adds $1 to $4 per square foot. These are our installed prices. Your exact price comes from a free written quote after we look at your site.
This guide walks through what changes the number, how to work out a rough range for your own project, and what a per-square-foot price usually does not cover.
What a Concrete Driveway Costs by Finish
Finish is the biggest single swing factor in a concrete driveway’s price. A plain broom finish typically runs $5 to $10 per square foot installed. Adding integral color or exposing the aggregate mixed into the concrete moves the range to $8 to $14 per square foot, because the material and labor both change.
Stamped concrete, which presses a pattern into the surface while it is still workable, typically runs $10 to $21 per square foot; see stamped and decorative finishes.
For a full breakdown of concrete prices by finish, including patios and walkways priced on the same per-square-foot basis, see concrete prices by finish.
How to Estimate Your Own Driveway Cost
You do not need a contractor on site to get a rough sense of your project’s cost. Start by measuring the driveway itself in feet, then multiply length by width to get square feet. A driveway that runs 12 feet by 50 feet is 600 square feet.
Measure any apron where the driveway meets the street, any flare where it widens near the garage, and any parking pad as separate areas, then add them to your total. These sections often get left out of a quick measurement and then show up as a surprise on the quote.
Once you have total square feet, multiply by the low end and the high end of the per-square-foot price for the finish you want. That gives you a rough range rather than a single number, which is closer to how an actual quote works once site conditions are factored in.
If an old driveway has to come out first, add the removal price per square foot for that same area on top of the new concrete price. Removal is priced separately because breaking out and hauling off old concrete is its own job with its own equipment and disposal cost, whether or not the new pour uses the same footprint.
New Driveway or Replacement
A new driveway poured on bare ground and a driveway that replaces an old slab are two different jobs with two different cost drivers. New construction mainly depends on square footage, finish, and how the site is graded and prepped before the pour.
Replacement adds tear-out and haul-off, plus a look at what is underneath the old slab. An old base that has settled, cracked, or trapped water needs more prep than one that is still sound, and that prep work happens before the new concrete goes down, not after.
Replacement is also the point where many homeowners extend or reshape the driveway: widening it for a second vehicle, adding a parking pad along one side, or tying in a walkway section. Stoutwell Concrete forms and pours concrete driveway installation and replacement, including extensions to an existing driveway.
What Pushes a Driveway Toward the High End
A handful of site and design factors push a project toward the top of its finish range rather than the bottom.
A driveway that carries daily truck or RV traffic needs a thicker, more heavily reinforced slab than one used only by passenger cars, and that extra concrete and steel shows up in the per-square-foot price. Grading and drainage slope matter too: a site that needs extra grading, fill, or a redesigned slope to move water away from the house and foundation adds work the flat per-square-foot number does not show.
Truck access affects labor. A driveway a concrete truck and pump can reach directly is faster and less expensive to pour than a tight side yard or a lot that needs the concrete wheeled or pumped a long distance.
In regions that see repeated freezing and thawing, the mix design matters as well. In an air-entrained mix, tiny air voids act as pressure relief sites, each one protecting the hardened cement paste around it, which is how the mix resists the internal pressure that freeze-thaw cycles create. If your area freezes, ask whether a quote specifies an air-entrained mix.
Control joints also factor in. Concrete shrinks slightly as it cures, and if that shrinkage is restrained, the resulting stress can crack the slab in an uncontrolled spot instead of at a planned joint. In concrete flatwork, control joints are spaced no more than 24 to 36 times the slab’s thickness apart, with joints tooled during finishing or saw-cut within hours after it, so more control joints, and more careful layout around drains, steps and utility covers, mean more labor per square foot.
What a Per-Square-Foot Price May Leave Out
A per-square-foot price is a useful starting point, but it does not automatically include everything a project might need. The items below are commonly left out of a base quote and worth asking about directly.
| Item | How it is usually priced | Notes |
|---|---|---|
| Street permit and inspection | Separate city or county fee, not per square foot | Applies to work that touches the street, such as a driveway approach or sidewalk section |
| Sealing an existing slab | Not offered by Stoutwell Concrete | Ask a sealing specialist what a sealer covers and how often it needs reapplying |
| Drainage or landscape repair | Priced separately from the concrete pour | Comes up when grading, downspouts, or plantings near the driveway need work |
The right slab depends on the soil, the drainage, local permit rules and how the surface will be used. Requirements vary by site, scope and jurisdiction; the city or county permit office, and a site visit before the quote is final, determine what applies.
When you compare quotes from different contractors, line them up by the same measurements: the same total square footage, the same finish, whether removal is included, what base and reinforcement are specified, and how many control joints are planned. Two quotes with the same per-square-foot number can still cover different scopes. It is also reasonable to ask what a warranty covers before you rely on one, since terms vary by contractor and are worth reading in full rather than assuming.
Concrete Driveway Cost by State
Each state guide puts our prices next to what shapes a driveway there: frost, soil and the permit for work at the street.
- Arkansas
- Colorado
- Delaware
- Georgia
- Illinois
- Indiana
- Iowa
- Kansas
- Kentucky
- Louisiana
- Maine
- Michigan
- Mississippi
- Missouri
- Montana
- Nebraska
- New Hampshire
- North Carolina
- North Dakota
- Ohio
- Oklahoma
- South Dakota
- Tennessee
- Texas
- Utah
- Vermont
- West Virginia
- Wisconsin
- Wyoming
The section at the street, the apron, takes the most load and often fails first; our driveway apron cost guide prices it on its own. Already have a driveway that is too narrow? Our driveway extension cost guide prices widening and parking pads, and our guide to broom finish concrete explains the standard driveway texture.
Frequently Asked Questions
How do I estimate what my driveway will cost?
Measure the length and width of the driveway, including any apron, flare, or parking pad as separate areas, and multiply to get total square feet. Multiply that number by the low and high end of the per-square-foot price for the finish you want to get a rough range, then add the removal price per square foot if an old slab has to come out first.
Is replacing a driveway more expensive than pouring a new one?
A replacement typically costs more than a new pour on bare ground, because tearing out and hauling off the old slab is priced separately from the new concrete, typically $1 to $4 per square foot on top of the finish price. The condition of the old base underneath also affects how much prep the new slab needs.
What is not included in a driveway’s per-square-foot price?
A per-square-foot price generally leaves out permit and inspection fees for work that touches the street, sealing an existing slab (Stoutwell Concrete does not offer sealing), and any drainage or landscape repair the project uncovers. Ask what each quote covers before comparing them line by line.
Ready to Get a Number for Your Project?
A per-square-foot range is a good starting point for budgeting. Stoutwell Concrete forms and pours concrete driveways, including replacements and extensions, and after we review the site, measurements, access, preparation and the finish you choose, we give you a detailed written quote. Request a free driveway quote to get started.
More Concrete Guides
Cost Guides Concrete Driveway Apron Cost (2026)
A concrete driveway apron costs $5 to $10 per sq ft with us: a 16 by 10 foot apron is $800 to $1,600, plus $1 to $4 per sq ft to remove an old one. See totals.
Cost Guides Concrete Removal Cost in 2026
Concrete removal runs $1 to $4 per sq ft with us when we pour new: $576 to $2,304 for a 24 by 24 driveway. See totals for walks, patios and driveways.
Cost Guides Driveway Extension Cost: Widening With Concrete
A concrete driveway extension runs $5 to $10 per sq ft with us; adding 4 feet along a 40 foot drive is $800 to $1,600. See totals for pads and widening.
Ready for a Free Quote?
Get a free, no-obligation quote for your property.
Get Your Free QuoteOr call us directly: (919) 219-2946