freshly finished concrete driveway at a newly built home

Concrete Driveway Installation and Replacement

We form and pour new concrete driveways and replace cracked, settled, or crumbling slabs, from base prep through the finish you choose.

Why Choose Us

Free QuotesNew & Replacement DrivewaysPlain, Colored & Stamped Finishes

What Goes Into a New Concrete Driveway

A cracked, sunken, or crumbling driveway often traces back to the base underneath it, not just the slab on top. We form and pour a new driveway on a compacted base, with the thickness and reinforcement the vehicle load calls for, and finish it in the surface you choose.

Where an old driveway has to come out first, we handle the tear-out and haul-off before the new pour, with removal priced on our pricing page. Our driveway replacement cost guide adds the two together for common sizes, and our guide on whether to repair or replace a concrete driveway helps you decide if a new slab is the answer.

  • Base and subgrade. A compacted gravel base under the slab spreads the load and drains water away from the concrete, so the driveway does not rest directly on loose or wet soil.
  • Thickness and reinforcement. Most residential driveways are formed 4 to 6 inches thick: about 4 inches for passenger cars and SUVs, 5 to 6 inches where trucks or an RV park regularly. Wire mesh is common in 4 to 5 inch slabs, rebar in slabs 5 inches or thicker.
  • Control joints. Joints are cut into the fresh slab at roughly two to three times its thickness in feet apart (about 8 to 12 feet apart for a 4-inch slab), so the natural cracking that happens as concrete dries and shrinks occurs at the joint instead of at random across the surface.

The right slab depends on the soil, the drainage, local permit rules and how the surface will be used. Requirements vary by site, scope and jurisdiction; the city or county permit office, and a site visit before the quote is final, determine what applies.

How a Concrete Driveway Gets Poured

What happens between your quote request and a finished driveway.

1

Request a Free Quote

Share your driveway's size, condition, and the finish you want, and get a free, no-obligation quote.

2

We Form and Pour Your Driveway

We prepare the base, set forms, place reinforcement, and pour and finish the concrete in the surface you chose.

3

Use Your New Driveway

Concrete keeps gaining strength for weeks after the pour; the American Cement Association notes that standard practice is to measure concrete's strength at 28 days.

Concrete Driveway Installation and Replacement

What a new or replacement driveway from Stoutwell Concrete includes.

New Pours and Replacements

We form and pour a brand-new driveway on bare ground or replace an existing slab, including the tear-out of what is there now.

Sized to the Load

Thickness and reinforcement are set for the vehicles the driveway will carry, from a daily sedan to a work truck or RV.

Your Choice of Finish

Plain broom, colored, exposed aggregate, or stamped concrete, all formed and poured as one driveway service.

Get a Free Quote for Concrete Driveways

Tell us about your driveway project and we will follow up with a free quote. See how pricing works on our pricing guide.

Request a Free Quote

Concrete Driveways FAQ

Can you widen or extend my existing driveway?
Yes. We form and pour driveway extensions and side parking pads tied into the existing slab.
Do you remove my old driveway first?
Yes. When an old slab needs to come out before the new pour, we handle the tear-out and haul-off, with removal priced on our pricing page.
What reinforcement goes into a driveway?
Wire mesh is common in slabs 4 to 5 inches thick, and rebar is used in slabs 5 inches or thicker. Reinforcement does not stop shrinkage cracking; it helps hold a crack together if one forms.

Ready to Get Started?

Get a free, no-obligation quote for concrete driveways.

Get Your Free Quote

Or call us directly: (919) 219-2946

Call Free Quote