long new concrete driveway with bare soil along both edges

The Cost of Concrete Per Square Foot

What you pay depends on the finish and the size of the job. Our plain broom-finish concrete runs $5 to $10 per square foot installed, colored or exposed aggregate $8 to $14, and stamped concrete $10 to $21.

What Moves a Concrete Quote

The per-square-foot price above is a starting point. These factors move it up or down.

Finish You Choose

Plain broom-finish concrete costs less per square foot than colored, exposed aggregate, or stamped finishes. See the price row for each finish below.

Thickness and Reinforcement

A driveway that carries trucks or an RV is formed thicker and reinforced differently than a walkway or patio, which changes the material and labor in every square foot.

Tear-Out of an Old Slab

When an old driveway, patio, or walkway has to come out before the new pour, removal typically adds $1 to $4 per square foot on top of the new concrete price.

Site Access and Base Prep

A yard or driveway that equipment can reach easily costs less to prepare than a tight side yard or a site that needs extra grading and a deeper base before the pour.

Local Permit Requirements

Work that touches the street, such as a driveway approach or a sidewalk, can trigger a city or county permit and inspection. Requirements vary by site, scope and jurisdiction; the local permit office determines what applies.

Our Concrete Prices by Service

Per square foot, installed. Your own price comes in a free written quote.

  • Concrete Driveways

    Plain broom finish, installed. Colored or exposed aggregate driveways run $8 to $14 per square foot; stamped concrete is priced in the row below. Removing an old driveway before the new pour is a separate line item.

    Starting $5 to $10 per sq ft
  • Concrete Patios

    Plain broom finish, installed. Patios are quoted on the same per-square-foot basis as driveways, whether it is a small sitting area or a full backyard pour.

    Starting $5 to $10 per sq ft
  • Stamped & Decorative Concrete

    Installed price for a stamped pattern on a driveway or patio, depending on the pattern and how much color work goes into the finish. Colored or exposed aggregate concrete without a stamped pattern runs $8 to $14 per square foot.

    Starting $10 to $21 per sq ft
  • Concrete Walkways & Sidewalks

    Plain broom finish, installed. Walkways and sidewalks are quoted on the same per-square-foot basis as driveways, by finish.

    Starting $5 to $10 per sq ft

Your own price comes in a free written quote, made final once we have seen the site. Final scope and pricing are confirmed after the site has been inspected and the project requirements have been documented.

Commercial Flatwork

Per square foot, installed, for a plain broom finish. Curb and gutter and ramps are quoted per job.

  • Lot Sections & Small Lots

    Plain broom finish, installed. The thickness follows the traffic the lot carries, and cutting out the old section is a separate line item.

    Starting $5 to $10 per sq ft
  • Pads & Aprons

    Dumpster pads, equipment pads and loading aprons. A 12 by 24 foot pad is 288 square feet, $1,440 to $2,880.

    Starting $5 to $10 per sq ft
  • Sidewalks & Ramps

    Sidewalk sections at the plain broom range. Curb ramps with a domed warning panel are quoted per job.

    Starting $5 to $10 per sq ft
  • Curb & Gutter

    Priced by the run, so the written quote sets the length, the form and any permit.

    Priced Quoted per job

Commercial flatwork is quoted the way our residential work is: a free quote first, then a detailed written price for the agreed scope.

Why We Don't Publish One Flat Price

Every concrete job is priced by area and finish, so a quote for a 400 square foot patio looks different from a quote for a 1,200 square foot driveway even at the same per-square-foot rate. Soil, drainage, and how the surface will be used also change the thickness and reinforcement a slab needs, and a thicker or more heavily reinforced slab costs more to form and pour than a lighter one of the same footprint.

Removing an old slab, working around tight site access, and any permit tied to work that touches the street add cost that a flat number cannot capture. A gravel base that already drains well and a driveway an equipment truck can reach directly both keep the job closer to the low end of the range for that finish. After reviewing the site, measurements, access, preparation requirements, and selected finish, we provide a detailed written quote for the agreed project scope. The national guide on concrete driveway cost explains how our ranges add up, and our concrete patio cost guide does the same for patios.

Want a Real Number for Your Property?

Get a free, detailed written quote for your driveway, patio, or walkway.

Pricing Questions

How much does it cost to remove an old driveway or patio?
Removing an old slab before the new pour typically adds $1 to $4 per square foot on top of the price for the finish you choose.
Do patios cost the same as driveways per square foot?
Patios are quoted on the same per-square-foot basis as driveways. Your patio's exact figure comes with your free quote.
Does a permit add to the cost?
It can. Work that touches the street, like a driveway approach or a sidewalk, can require a city or county permit and inspection. Requirements vary by site, scope and jurisdiction; the local permit office and a site visit determine what applies to your project.
Is the price on this page final?
No. These are our installed price ranges, to help you budget. We provide a detailed written quote after an on-site assessment of your property. Request a free quote to get started.

Ready for a Detailed Written Quote?

Get a free, no-obligation quote with a written project price.

Get Your Free Quote

Or call us directly: (919) 219-2946

Call Free Quote