Concrete Driveway Cost in San Antonio, TX

Slope, clay and finish place each job. Plain broom comes in at $5 to $10 per square foot, color or exposed aggregate at $8 to $14, stamping at $10 to $21, all installed. These are our installed prices around San Antonio.

A site check makes your free quote final; the ranges are explained in our concrete driveway cost guide. How the ground and the city permit work here is covered in our San Antonio soil guide and our San Antonio driveway permit guide. The right slab depends on the soil, the drainage, local permit rules and how the surface will be used. Requirements vary by site, scope and jurisdiction; the city or county permit office, and a site visit before the quote is final, determine what applies.

What each finish involves is on the San Antonio, TX services page, and the towns we serve are on the San Antonio, TX page.

Our Concrete Prices for the San Antonio Area

Concrete Driveways

$5 to $10 per sq ft

Installed, plain broom. Color or exposed aggregate brings it to $8 to $14 per square foot, and taking out the old slab runs $1 to $4 per square foot more.

Concrete Patios

$5 to $10 per sq ft

Installed, plain broom, from driveway figures. A real patio number comes in your free quote, made final once slope, ground and backyard access are seen.

Stamped & Decorative Concrete

$10 to $21 per sq ft

Installed, driveway or patio. Pattern complexity and color choices move a job through the range. Without stamping, color or exposed aggregate is $8 to $14 per square foot.

Concrete Walkways & Sidewalks

$5 to $10 per sq ft

Installed, plain broom, using the same driveway figures. Where a walk meets the street or curb, the city permit list may apply, and the base is still prepared.

These are our installed prices. Your written quote is free. Final scope and pricing are confirmed after the site has been inspected and the project requirements have been documented.

What Moves a San Antonio Concrete Quote

Plateau or Plain

A lot on the sloping north side can take more forming and grading than one on the level south, and the quote reflects that.

Clayey Ground

Deep clay calls for more care with the base and joints, which is priced into the written quote.

City Permits

Whether the job touches the right-of-way matters for the schedule more than for the per-square-foot price, so it is checked early with the city.

Finish You Choose

Broom texture sits at the bottom of our range. Color, exposed stone and stamping each raise it, and a patio can be stamped while the walk beside it stays plain.

Removing the Old Slab

Demolition and haul-off typically add $1 to $4 per square foot, and thick or reinforced concrete breaks up harder than a thin slab. The site check covers what is there and truck access.

San Antonio Concrete Cost FAQ

What should I budget per square foot for a San Antonio driveway?
Our plain broom-finish driveways come in at $5 to $10 per square foot installed. Color, exposed aggregate and stamping cost more, and your own number comes in a free quote once a site check is done.
Would a city permit add to my San Antonio project cost?
It can add time and paperwork if the work touches the right-of-way. The city sets its permit fees and can change them, so check the current amount with the city.
Is removal of an old driveway included in these numbers?
No. Demolition and haul-off is a separate range of $1 to $4 per square foot, added when the old slab comes out first. A site check confirms how much concrete there is and how a truck reaches it.
Does a hilly lot cost more than a flat one?
It can. Forming, grading and drainage take more effort on a slope, common in the north of Bexar County. We size that when we see the lot, so mention the slope and the nearest town when you ask for the free quote.

Get a Real Number for Your San Antonio Property

Your free written quote is made final after a look at slope, soil, drainage, and access to the work area.

Request a Free Quote

Or call us directly: (919) 219-2946

Call Free Quote