Cost Guides

Stamped Concrete Driveway Cost and Upkeep

Stoutwell Concrete · November 15, 2026 · 7 min read

concrete driveway in front of a house leading to an attached garage

A stamped concrete driveway costs $10 to $21 per square foot with us, against $5 to $10 for a plain broom finish. A 24 by 24 foot two-car driveway, 576 square feet, comes to $5,760 to $12,096 stamped, or $2,880 to $5,760 plain. A stamped border around a plain driveway sits between the two. These are our installed prices, and your own number comes from a free written quote.

What a Stamped Driveway Costs

A driveway is priced by its area, length times width. Three common sizes, stamped and plain:

DrivewayAreaPlain broom ($5 to $10)Stamped ($10 to $21)
Single-car, 12 by 40 feet480 sq ft$2,400 to $4,800$4,800 to $10,080
Two-car, 24 by 24 feet576 sq ft$2,880 to $5,760$5,760 to $12,096
Long two-car, 20 by 50 feet1,000 sq ft$5,000 to $10,000$10,000 to $21,000

If an old driveway has to come out first, removal is its own line at $1 to $4 per square foot. On the two-car driveway that adds $576 to $2,304. Our driveway replacement cost guide works through full tear-out totals.

Where a job falls inside $10 to $21 comes down to the design. One pattern in one color sits toward the low end. A pattern that needs careful alignment, a contrasting border and two or more colors move it toward the top. Our stamped concrete patterns guide explains each pattern family and which ones suit a drive.

The Middle Option: A Stamped Border on a Plain Drive

Stamping the whole driveway roughly doubles the price of a plain one. A stamped border gives a driveway the decorative look at the edges, where it shows from the street, while the field where cars actually drive stays in a plain broom finish.

Here is the arithmetic for a 2 foot stamped border down both long sides and across the street end, with the garage end left plain:

DrivewayBorder areaPlain field areaBorder ($10 to $21)Field ($5 to $10)Total
Two-car, 24 by 24 feet136 sq ft440 sq ft$1,360 to $2,856$2,200 to $4,400$3,560 to $7,256
Long two-car, 20 by 50 feet232 sq ft768 sq ft$2,320 to $4,872$3,840 to $7,680$6,160 to $12,552

On the two-car drive, the border is two strips of 2 by 24 feet (96 square feet) plus a 2 by 20 foot strip across the street end between them (40 square feet). On the long drive, it is two strips of 2 by 50 feet (200 square feet) plus a 2 by 16 foot strip (32 square feet).

A border on a narrow single-car drive takes a bigger share of the slab, so the savings there are smaller. A colored or exposed aggregate driveway at $8 to $14 per square foot is another way to get more than a plain gray slab without a full stamp.

What Cars Do to a Stamped Surface

A stamped driveway is built as a driveway first: a thicker slab on a compacted base, with reinforcement and joints planned for vehicle loads. The pattern is pressed into that slab, so it does not peel or flake off like a coating. What wears is the surface color and the sealer on top.

Tires. Cars turning in the same spots, especially turning the wheel while parked, wear the sealer and the surface color in the wheel paths first. A mid-tone color hides that wear better than a very light or very dark one.

Hot tire pickup. On a hot day, warm tires can soften some sealers and lift them off when a car pulls away, leaving bare patches or rings. A sealer suited to driveways, applied thin and fully cured before the first car rolls on, is the fix.

Oil and fluids. Oil, transmission fluid and coolant soak into concrete. A sealed stamped drive resists them for a while, but drips left sitting will stain. Wiping spills soon and keeping the sealer fresh is the best defense.

Salt and snow shovels. Where winters freeze, deicing salt and freeze-thaw cycles attack the surface, and a sealer that has worn thin lets water and salt in. A plastic shovel blade or a rubber-edged plow is kinder to a stamped surface than a steel edge, which can catch the high points of the pattern and scrape off color.

Resealing: Upkeep, Not a Service We Sell

The sealer on a stamped driveway does the work of protecting the color and keeping water, oil and salt out. It wears faster on a driveway than on a patio because of tires. Most stamped drives need a fresh coat of sealer every two to three years, or sooner when water stops beading on the surface and the color starts to look dull or chalky.

We seal the driveway as part of the new pour. Resealing later is ordinary upkeep for the owner, not a service we sell. Our concrete driveway sealer guide covers sealer types and timing.

Grip and Joints on a Stamped Drive

A glossy sealer on a smooth pattern can be slick in rain or frost. On a sloped driveway, we can mix a fine grit into the sealer coat for more grip, and a pattern with more texture, such as slate or cobblestone, holds tires and shoes better than a nearly smooth one.

Every driveway needs control joints, planned lines where the slab is allowed to crack as it shrinks and moves. On a stamped drive, we lay out the joints before the pour and cut them along the grout lines of the pattern wherever we can, so they read as part of the stone or brick instead of a straight cut across it.

Frequently Asked Questions

How much does a stamped concrete driveway cost?

Our installed price for a stamped concrete driveway is $10 to $21 per square foot. A 24 by 24 foot two-car driveway, 576 square feet, comes to $5,760 to $12,096. The same driveway in a plain broom finish is $2,880 to $5,760. Your own number comes from a free written quote.

Is a stamped border on a plain driveway cheaper?

Yes. A 2 foot stamped border down both sides and across the street end of a 24 by 24 foot driveway covers 136 square feet. With the other 440 square feet in plain broom, the driveway comes to $3,560 to $7,256, against $5,760 to $12,096 stamped edge to edge.

How often should stamped concrete be sealed?

A stamped driveway is usually resealed every two to three years, or sooner when water stops beading on it and the color starts to look dull. Resealing is ordinary upkeep for the owner, not a service we sell.

Does a stamped driveway hold up to cars?

Yes, when it is built as a driveway: a thicker slab on a compacted base, with reinforcement and joints planned for vehicle loads. The stamp is pressed into that slab, so the pattern wears with the concrete, not like a coating.

Is a stamped concrete driveway slippery?

A glossy sealer can make it slick when wet. We can mix a fine grit into the sealer coat, and patterns with more texture, such as slate or cobblestone, give tires and shoes more grip than a smooth one.

What is hot tire pickup on a stamped driveway?

On a hot day, warm tires can soften some sealers and lift them off the surface when a car pulls away, leaving bare patches or marks. Choosing a sealer suited to driveways and letting it cure fully before driving on it keeps it from happening.

Get a Stamped Driveway Quote

Stoutwell Concrete forms and pours stamped driveways, stamped borders on plain drives and colored or exposed aggregate driveways. Tell us the pattern and colors you like, and a look at the driveway makes the written quote final. Read more about our stamped and decorative concrete, or request a free quote to get started.

Ready for a Free Quote?

Get a free, no-obligation quote for your property.

Get Your Free Quote

Or call us directly: (919) 219-2946

Call Free Quote