Concrete Driveway Cost in Indiana (2026)
Stoutwell Concrete · October 10, 2026 · 8 min read
A concrete driveway in Indiana typically costs $5 to $10 per square foot installed for a plain broom finish. Your own number comes from a free written quote. Where an Indiana drive lands in that range depends partly on two things the state code lists county by county: frost depth, and a severe weathering rating in all 92 counties.
At a glance:
- Broom finish on a 576 sq ft two-car drive (24 by 24 feet): $2,880 to $5,760.
- The Indiana Residential Code puts frost footings at 36 inches in 27 northern counties, 30 inches in 29 central counties and 24 inches in 36 southern counties.
- Every county is rated “Severe” for weathering, and ready-mix guidance calls for an air-entrained mix in severe exposure.
- South Bend averages 126.4 nights a year at or below 32 F and 64.5 inches of snow; Evansville averages 90.4 nights and 10.8 inches.
- INDOT spreads salt brine and chlorides on more than 29,000 lane miles from mid-November to mid-March, and that residue rides home on your tires.
- State law requires any home improvement contract over $150 to be in writing.
What Does a Concrete Driveway Cost in Indiana?
An Indiana drive is priced by the square foot of finished slab, and the finish you choose picks the row; for an L-shaped or flared drive, the national concrete driveway cost guide shows how to measure it.
| Finish or service | Our installed price | What it usually means on an Indiana job |
|---|---|---|
| Plain broom finish | $5 to $10 per square foot | The standard drive in all 92 counties; ask for an air-entrained mix given the severe weathering rating |
| Colored or exposed aggregate | $8 to $14 per square foot | Entry drives and walks; ask when it is sealed before the first salt season |
| Stamped | $10 to $21 per square foot | An edging strip, apron or patio; ask how its sealer stands up to INDOT’s chloride brine; compare in the stamped concrete cost guide |
| Removing an old slab | $1 to $4 per square foot | Drives scaled by salt, or panels heaved over wet till around Indianapolis |
| Two-car driveway, 24 by 24 feet (576 sq ft), plain broom | $2,880 to $5,760 total | A full replacement before any tear-out is added |
These are our installed prices. Inside each band, an Indiana quote moves with your county’s frost row, how wet the ground is, and the month of the pour.
What Changes the Price of a Driveway in Indiana
Frost depth by county (base and drainage). The 2020 Indiana Residential Code (675 IAC 14-4.4) gives one row per county with the footing depth frost demands: 36 inches from Lake and Porter east through St. Joseph, Elkhart and Allen; 30 inches through the middle, Marion included; 24 inches in the south, including Vanderburgh, Monroe and Clark. A drive has no footing, but the number says how far freezing reaches beneath it, so in the 36-inch counties, ask how the compacted, free-draining base is built.
Severe weathering statewide, and chlorides on the roads (mix and first winter). INDOT pre-treats highways with salt brine and plows each state road every 2 to 3 hours in a storm, with salt melting between passes. Ready-mix industry guidance from NRMCA (CIP 2) calls for 6 to 7 percent entrained air in severe exposure, about 4,000 psi where de-icers are used, no calcium or sodium chloride on the slab in its first year, and a breathable silane or siloxane sealer. Our quotes state the air content and strength; ask every bidder to do the same.
Glacial ground up north, thin clay and karst down south (site check and base). INDOT’s geotechnical design manual says glacial drift, some of it more than 400 feet thick, covers most of the northern two-thirds of the state, while the unglaciated south-central counties have thin residual clay over bedrock. It names the Mitchell Plain, Crawford Upland, Muscatatuck Plateau and Dearborn Upland as the main sinkhole regions. There, the installer should walk the slab line for soft spots before forming.
Wet till soils around Indianapolis (drainage). The Soil Survey of Marion County maps about 40 percent of the county as the Crosby-Brookston association: Crosby soils somewhat poorly drained, Brookston very poorly drained, and both rated severe for frost action under local roads and streets. On those lots, ask about slope, base depth and where the downspouts empty.
Hot summers in the southwest (curing). Evansville averages 41 days a year at 90 F or hotter, against Indianapolis’s 19.9. NRMCA’s hot weather guidance (CIP 12) ties heat, wind and dry air to plastic shrinkage cracks and calls for a dampened subgrade and curing that starts as finishing ends and runs at least three days. A July quote near Evansville should name the start time and curing method; how long concrete takes to cure covers when the car can go back on it.
Planning a backyard slab too? Our Indiana concrete patio cost guide prices patios by size and finish on the same basis.
When to Pour a Driveway in Northern, Central and Southern Indiana
In NOAA’s 1991 to 2020 normals, the median freeze dates shift from north to south.
South Bend, Fort Wayne and the northern counties
South Bend’s median last spring freeze falls on 1 May and its first fall freeze on 19 October; Fort Wayne’s season runs 24 April to 21 October, with 123.6 freezing nights and 33.6 inches of snow a year. NRMCA (CIP 27) warns that concrete frozen while still plastic can lose over half its potential strength, and wants the subgrade free of ice and above freezing first. Up north, an April or late October booking may need blankets, heated water or a later date, in writing.
Greater Indianapolis
Indianapolis has a median last freeze on 15 April and a first freeze on 26 October, with 105.5 freezing nights and 25.5 inches of snow a year. We form and pour driveways, patios, walkways and stamped concrete across Marion, Hamilton, Hendricks, Johnson, Boone and Hancock Counties, from Carmel, Fishers and Noblesville to Avon, Plainfield, Greenwood, Zionsville and Greenfield. All six counties sit in the code’s 30-inch frost row. The Indianapolis concrete driveway page covers the service area, and Indianapolis driveway pricing sets the finishes side by side.
Evansville and the southern counties
Evansville’s median last freeze is 4 April and first freeze 29 October, with 90.4 freezing nights and 10.8 inches of snow. Here summer heat often decides the pour time.
What to Check Before Hiring an Indiana Concrete Contractor
Indiana leaves contractor licensing to each community, as the Attorney General’s office points out, so the rule can change from one town to the next: call the building department where the drive is, then ask each bidder for proof. State law requires a home improvement contract over $150 to be in writing, with the price, payment schedule, a detailed description of work and materials, start and finish dates, and the contractor’s name and address. The office also advises getting written proof that suppliers were paid before the final payment, since an unpaid supplier can file a mechanic’s lien.
If the drive meets a state highway, INDOT requires a Private Driveway Permit for work inside the right of way, filed through its Electronic Permit System by the property owner. City streets and county roads have their own offices; have the quote say who applies and whether fees are included.
Ask when your car can go back on the slab; more questions are in our contractor hiring checklist.
Thinking about a pattern? Our Indiana stamped concrete cost guide prices stamped patios, walks and driveway borders on the same basis.
Frequently Asked Questions
How much does a concrete driveway cost in Indiana?
A plain broom-finish concrete driveway in Indiana typically costs $5 to $10 per square foot installed, which puts a 576 square foot two-car drive at $2,880 to $5,760. Colored or exposed aggregate is $8 to $14 a square foot, stamped work $10 to $21, and tearing out an old slab $1 to $4. Your own number comes from a free written quote.
How deep does frost go in Indiana?
The 2020 Indiana Residential Code sets footing depth by county: 36 inches in 27 northern counties, 30 inches in 29 central counties including Marion, and 24 inches in 36 southern counties. A driveway has no footing, but the figure shows how far freezing reaches, so ask how the base under a northern Indiana slab is built.
Can I put salt on a new concrete driveway in Indiana?
Not in its first winter. NRMCA guidance says to keep calcium and sodium chloride off concrete during its first year and never to use ammonium sulfate or ammonium nitrate. Shovel early, use sand for grip, and sweep off the brine that cars carry up from salted roads.
When is the best time to pour a driveway in Indiana?
Between the median freeze dates in NOAA’s 1991 to 2020 normals: about 4 April to 29 October in Evansville, 15 April to 26 October in Indianapolis, and 1 May to 19 October in South Bend. A pour near either end may need a written plan to keep the slab from freezing, and a southern summer pour may need an early start.
Get a Concrete Driveway Quote in Indiana
In Indiana, we also pour driveways, patios, walkways and stamped concrete around St. John, IN.
More Concrete Guides
Cost Guides Stamped Concrete Cost in Indiana (2026)
Stamped concrete in Indiana costs $10 to $21 per sq ft installed with us; a 12 by 16 foot patio is $1,920 to $4,032. See totals for walks, drives and borders.
Cost Guides Concrete Patio Cost in Indiana (2026)
A concrete patio in Indiana runs $5 to $10 per sq ft installed with us; a 16 by 20 foot patio is $1,600 to $3,200. See totals and what winter asks of a slab.
Guides Indianapolis Driveway Permit Guide
What the Indianapolis code says about driveway permits: curb and sidewalk cuts, the permit office, public works supervision, upkeep and what to ask.
Ready for a Free Quote?
Get a free, no-obligation quote for your property in Indiana.
Get Your Free QuoteOr call us directly: (919) 219-2946